Find serial port connection solution, check with RAYON anytime.
In this file you can find document to use APORT210 box in your RS232 sharer application environment. We can have one RS232
equipment to connect master port in APORT210 box. Then we can have local connection in slave port and two remote connections
in slave port via IP network. In traditional environment you need one S232 box to support one master and three slave connection firstly.
Then you need two IP to serial port converter boxes to let remote PC can connect via IP network.
In this file you can find iLOG110 box as RS232 Ground isolator and we can monitor the data stream in RS232 via IP network.
Generally we may need one RS232 Ground isolator between two RS232 devices for safety purpose. When we may need to monitor
data stream in RS232 connection, then iLOG110 box can support two COM ports to monitor via IP network. It is debug tool in RS232
environment.
In this file you can find APORT111 box will support one connector for RS232 and the other connector for GROUND isolated
RS422/RS485. Traditionally we may have only one connector for RS232,RS422,RS485 settable interface to connect with target
equipment. But you may have wrong setting for target interface type to connect with external equipment. Then you may have problem
to work and damage your equipment.
In this file you can find S272 box will share GPS data to 7 target equipments simultaneously.
In this file you can find S272 box will send same data to 7 target equipment simultaneously. In QC environment we may need data
source for target equipment to test and burn-in. It is not reasonable for one dedicated data source equipment to each target equipment.
So we can use same data source to all target equipmet.
¡@
RAYON Technology Co., Ltd.
2F, No.177, Chung_Shan 2 Rd., Lu_Chou, New Taipei City, Taiwan.
TEL: 886-2-82858362
FAX: 886-2-82857065